Arne Dahle

Professor material och tillverkning - gjutning
Avdelningen för material och tillverkning , Tekniska Högskolan i Jönköping AB
Professor
För en presentation av Arne Dahle, se engelska presentationsidan.

Artikel

Hernando, J., Elfsberg, J., Ghassemali, E., Dahle, A., Diószegi, A. (2020). The role of primary austenite morphology in hypoeutectic compacted graphite iron alloys International Journal of metalcasting.
Santos, J., Dahle, A., Jarfors, A. (2020). Magnesium solubility in primary α-al and heat treatment response of cast Al-7Si-Mg Metals, 10(5).
Bjurenstedt, A., Ghassemali, E., Seifeddine, S., Dahle, A. (2019). The effect of Fe-rich intermetallics on crack initiation in cast aluminium: an in-situ tensile study Materials Science & Engineering: A, 756, 502-507.
Hernando, J., Elfsberg, J., Ghassemali, E., Dahle, A., Diószegi, A. (2019). The effect of coarsening of primary austenite on the ultimate tensile strength of hypoeutectic compacted graphite Fe-C-Si alloys Scripta Materialia, 168, 33-37.
Santos, J., Jarfors, A., Dahle, A. (2019). Formation of Iron-Rich Intermetallic Phases in Al-7Si-Mg: Influence of Cooling Rate and Strontium Modification Metallurgical and Materials Transactions. A, 50(9), 4148-4165.
Bogdanoff, T., Dahle, A., Seifeddine, S. (2018). Effect of Co and Ni Addition on the Microstructure and Mechanical Properties at Room and Elevated Temperature of an Al–7%Si Alloy International Journal of metalcasting, 12(3), 434-440.
Santos, J., Kallien, L., Jarfors, A., Dahle, A. (2018). Influence of grain refinement on slurry formation and surface segregation in semi-solid Al-7Si-0.3Mg castings Metallurgical and Materials Transactions. A, 49A(10), 4871-4883.
Bjurenstedt, A., Casari, D., Seifeddine, S., Mathiesen, R., Dahle, A. (2017). In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy Acta Materialia, 130, 1-9.
Bogdanoff, T., Seifeddine, S., Dahle, A. (2016). The effect of SI content on microstructure and mechanical properties of Al-Si alloy La Metallurgia Italiana, 108(6) Milano: Associazione Italiana di Metallurgia .
Santos, J., Jarfors, A., Dahle, A. (2016). Filling, Feeding and Defect Formation of Thick-Walled AlSi7Mg0.3 Semi-Solid Castings Solid State Phenomena, 256, 222-227.

Bok

Ceschini, L. Dahle, A. Gupta, M. Jarfors, A. Jayalakshmi, S. Morri, A. , ... Singh R. (2017). Aluminum and Magnesium Metal Matrix Nanocomposites.

Konferensbidrag

Olofsson, J., Salomonsson, K., Dahle, A., Mathiesen, R. (2019). Three-dimensional study of nodule clustering and heterogeneous strain localization for tailored material properties in ductile iron. Joint 5th International Conference on Advances in Solidification Processes, ICASP 2019 and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining, CSSCR 2019, 17-21 June 2019.
Santos, J., Jarfors, A., Dahle, A. (2019). Variation of properties in the cross-section of semi-solid al-7si-0.3mg castings. 15th International conference on Semi-Solid Processing of Alloys and Composites, S2P 2018; Shenzhen; China; 22 - 24 October 2018.
Awe, S., Seifeddine, S., Jarfors, A., Dahle, A. (2016). Development of cast Al-Cu-Si ternary eutectic alloys for high temperature applications. Linköping: VBRI Press, European Advanced Materials Congress, 23-25 August 2016, Stockholm, Sweden.

Övrigt