Mats Jackson

Professor Innovative Production
Executive Vice President
President's Office , Jönköping University
Programme Manager, SPARK

Article

Flores-Garcia, E., Bruch, J., Wiktorsson, M., Jackson, M. (2020). Decision-making approaches in process innovations: an explorative case study Journal of Manufacturing Technology Management.
Sannö, A., Öberg, A., Flores-Garcia, E., Jackson, M. (2019). Increasing the Impact of Industry-Academia Collaboration through Co-Production Technology Innovation Management Review, 9(4), 37-47.
Asadi, N., Jackson, M., Fundin, A. (2019). Implications of realizing mix flexibility in assembly systems for product modularity—A case study Journal of manufacturing systems, 52, 13-22.
Ahlskog, M., Bruch, J., Jackson, M. (2019). The fuzzy front end of manufacturing technology development International Journal of Manufacturing Technology and Management (IJMTM), 33(5), 285-302.
Flores-Garcia, E., Bruch, J., Wiktorsson, M., Jackson, M. (2019). Challenges of discrete event simulation in the early stages of production system design International journal of industrial engineering, 26(5), 819-834.
Schedin, J., Svensson Harari, N., Jackson, M., Deleryd, M. (2016). Management of newness in an assembly system , 16(1), 92-108.
Asadi, N., Fundin, A., Jackson, M. (2015). The Essential Constituents of Flexible Assembly Systems: A Case Study in the Heavy Vehicle Manufacturing Industry Global Journal of Flexible Systems Management, 16(3), 235-250.
Gåsvaer, D., Stålberg, L., Jackson, M., Fundin, A., Johansson, P. (2015). Exploration and Exploitation within Operations International journal of economics and management engineering, 9(8), 2666-2671.
Wikström, A., Jackson, M. (2012). Visualization in Reflective Practice - Support for Management Design Management Journal, 7(1), 62-73.
Jackson, M., Hedelind, M., Hellström, E., Granlund, A., Friedler, N. (2011). Lean Automation: Requirements and Solutions for Efficient use of Robot Automation in the Swedish Manufacturing Industry International Journal of Engineering Research & Innovation, 3(2), 36-43.
Hedelind, M., Jackson, M. (2011). How to Improve the Use of Industrial Robots in Lean Manufacturing Systems Journal of Manufacturing Technology Management, 22(7), 891-905.
Jackson, M., Zaman, A. (2007). Factory-In-a-Box – Mobile Production Capacity on Demand International Journal of Modern Engineering, 8(1), 12-26.
Stillström, C., Jackson, M. (2007). The concept of mobile manufacturing Journal of manufacturing systems, 26(3-4), 188-193.
Jackson, M., Johansson, C. (2003). An Agility Analysis from a Production System Perspective Integrated Manufacturing Systems, 14(6), 482-488.
Fagerström, B., Jackson, M. (2002). Efficient collaboration between main and sub-suppliers Computers in industry (Print), 49(1), 25-35.

Conference paper

Chirumalla, K., Jackson, M., Bruch, J., Andersson, N., Löv, R. (2018). Exploring feedback loops in the industrialization process: A case study. 8th Swedish Production Symposium, SPS 2018; Waterfront Convention Centre, Stockholm, Sweden, 16 - 18 May 2018.
Flores Garcia, E., Bruch, J., Wiktorsson, M., Jackson, M. (2016). Towards a Reduction of Uncertainty in Production System Design Decisions. Swedish Production Symposium 2016 SPS 2016, 25 Oct 2016, Lund, Sweden.
Ahlskog, M., Bruch, J., Jackson, M. (2016). Managing early manufacturing technology development phases and key activities. 23rd EurOMA conference, EUROMA 2016, 17-22 Jun 2016, Trondheim, Norway.
Andersen, A., Rösiö, C., Bruch, J., Jackson, M. (2016). Reconfigurable Manufacturing - An Enabler for a Production System Portfolio Approach. 6th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), SEP 04-06, 2016, Bath, ENGLAND.
Ahlskog, M., Bruch, J., Jackson, M. (2015). Joint Development of a Manufacturing Technology: A Longitudinal Case Study within the Manufacturing Industry. 22nd International Annual EurOMA Conference EurOMA15, 26 Jun-1 Jul, 2015, Neuchâtel, Switzerland.
Carlsson, A., Bengtsson, M., Fundin, A., Jackson, M., Strömberg, A. (2015). Phases of Co-Production: Follow-up Research on the Industrial Research School INNOFACTURE. Co-creation between Academia and Industry – CAI’15, At Mälardalens University, Västerås.
Asadi, N., Jackson, M., Fundin, A. (2015). Identification of the causes of complexity in mixed-product and mixed-model assembly lines. 22nd EurOMA Conference, OPERATIONS MANAGEMENT FOR SUSTAINABLE COMPETITIVENESS, JUNE 26TH - JULY 1ST, 2015, NEUCHÂTEL, SWITZERLAND.
Ahlskog, M., Jackson, M., Bruch, J. (2015). Manufacturing Technology Readiness Assessment. Production and Operations Management, Society, POMS 26th Annual Conference, Washington D.C., USA, May 8-11, 2015.
Asadi, N., Jackson, M., Fundin, A. (2015). Drivers of complexity in a flexible assembly system - A case study. CIRP CMS 2015 - 48th CIRP Conference on MANUFACTURING SYSTEMS, 24-26 June 2015, Ischia (Naples), Italy.
Asadi, N., Jackson, M., Fundin, A. (2015). Handling product variety in a mixed-product assembly line: A case study. 20th International Conference on Engineering Design, ICED 2015; Bovisa Campus of Politecnico di Milano, Milan; Italy; 27 July 2015 through 30 July 2015.
Flores Garcia, E., Wiktorsson, M., Jackson, M., Bruch, J. (2015). Simulation in the Production System Design Process of Assembly Systems. Winter Simulation Conference 2015 WSC15, 6 Dec 2015, Huntington Beach, CA, United States.
Flores Garcia, E., Jackson, M., Wiktorsson, M. (2014). A Virtual Verification Approach Towards Evaluating a Multi-Product Assembly Systems. Göteborg, Sweden Swedish Production Symposium 2014 SPS 2014, 16 Sep 2014, Göteborg, Sweden.
Bojesson, C., Jackson, M., Strömberg, A. (2014). Rethinking effectiveness: Addressing managerial paradoxes by using a process perspective on effectiveness. 21st EurOMA Conference, June 20-25, Palermo, Italy.
Bojesson, C., Jackson, M. (2014). Linking development efficiency, effectiveness, and process improvements. Tools and Methods of Competitive Engineering 2014 TMCE 2014, 19-23 May 2014, Budapest, Hungary.
Svensson Harari, N., Bruch, J., Jackson, M. (2014). Mixed-Product Assembly Lines: Characteristics and Design Challenges. 6th Swedish Production Symposium, SPS14, Gothenburg, Sweden..
Ahlskog, M., Bruch, J., Jackson, M. (2014). Factors affecting development of production technologies in a machining environment. Tools and Methods of Competitive Engineering 2014 TMCE 2014, 19-23 May 2014, Budapest, Hungary.
Asadi, N., Schedin, J., Fundin, A., Jackson, M. (2014). Considering assembly requirement specifications in product development: identification and approach. 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), May 20-23, 2014, San Antonio, Texas, USA.
Svensson Harari, N., Osterman, C., Bruch, J., Jackson, M. (2014). Flexibility in Lean Mixed Model Assembly Lines. IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2014; Ajaccio; France; 20 September 2014 through 24 September 2014.
Granlund, A., Jackson, M. (2013). Managing automation development projects: A comparison of industrial needs and existing theoretical suppor. 23rd International Conference on Flexible Automation & Intelligent Manufacturing, 26-28 June 2013, Porto, Portugal.
Andersson Schaeffer, J., Jackson, M. (2013). Spatial design supporting the management of radical improvements within the manufacturing industry. Seoul, Korea, Dem. Republic of: the Design Society, International Conference on Engineering Design, ICED13 19-22 august 2013, Sungkyunkwan University, Seoul, Korea.
Asadi, N., Fundin, A., Jackson, M. (2013). Exploring optimal flexible assembly systems. Iguassu, Brazil: ICPR22, 22nd International Conference on Production Research, July 28-August 1, 2013. Iguassu, Brazil..
Norouzilame, F., Jackson, M. (2013). On the Application of Discrete-event Simulation in Production. FAIM 2013, 23rd International Conference on Flexible Automation & Intelligent Manufacturing, from 26-28 June 2013, Porto, Portugal.
Svensson Harari, N., Bruch, J., Jackson, M. (2013). Flexibility Needs and Enablers in Assembly Systems. ICPR 22, 22nd International Conference on Production Research,Iguassu Falls, Brazil,July 28th - August 1st.
Zafarzadeh, M., Jackson, M. (2013). Automation from lean perspective: Potentials and challenges. The 11th International Conference on Manufacturing Research, 19 September, 2013..
Sundmark, O., Sundmark, D., Cedergren, S., Jackson, M. (2012). Performance in the Public Sector - Efficiency and Effectiveness of Payroll Services in Three Municipalities. Proceedings of the 2012 Performance Measurement (PMA'2012) Conference, 11-13 July, 2012, Cambridge.
Granlund, A., Friedler, N., Jackson, M., Hellström, E., Carnbo, L. (2012). The concept of Lean Automation - a pilot installation. The 5th International Swedish Production Symposium, SPS'12, 6th-8th of November, 2012, Linköping, Sweden.
Javadi, S., Shahbazi, S., Jackson, M. (2012). Supporting production system development through the Obeya concept. APMS 2012 Conference, Advances in Production Management Systems, 24-26 September, Rhodes Island, Greece, 2012.
Wikström, A., Jackson, M. (2012). Demystifying Innovation and Design - the Importanze of Visualization in Ideation and Conceptual Design. 12th International Design Conference, Design 2012, May 21-24, 2012, Dubrovnik, Croatia.
Eklund, A., Wiktorsson, M., Jackson, M. (2009). Internal Materials Handling in a Lean Manufacturing Environment: Challenges and a Design Process from an Industrial Perspective. The International Swedish Production Symposium Göteborg, 2-3 december 2009.
Sörensen, K., Wiktorsson, M., Jackson, M. (2009). Towards a manufacturing strategy supporting make or buy decisions and a global manufacturing structure. Goteborg Swedish Production Symposium, SPS09.
Granlund, A., Hedelind, M., Wiktorsson, M., Hällkvist, A., Jackson, M. (2009). Realizing a Factory-in-a-Box Solution in a Local Manufacturing Environment. Grenoble, France 42nd CIRP Conference on Manufacturing Systems Sustainable Development of Manufacturing Systems Grenoble, Wed. 3 - Fri. 5, June 2009.
Jackson, M., Hedelind, M., Hellström, E. (2009). Robot Automation in a Lean Manufacturing System. The CARV International Conference on Agile, Reconfigurable and Virtual Production.
Rösiö, C., Jackson, M. (2009). Enabling Changeability in Manufacturing System Design by adopting a Life Cycle Perspective. The International Conference on Changeable, Agile, Reconfigurable and Virtual Production.
Wiktorsson, M., Wikström, A., Jackson, M., Ekman, S. (2009). Developing idPeo –- A Multidiciplinary Approach to Product Realization. 17th International Conference on Engineering Design Location: Stanford Univ, Stanford, CA Date: AUG 24-27, 2009.
Jackson, M., Ekman, S., Wikström, A., Wiktorsson, M. (2009). Innovation and Design Inspired Product Realization. Stanford 17th International Conference on Engineering Design, ICED 09; Palo Alto, CA; 24 August 2009 through 27 August 2009.
Hedelind, M., Hellström, E., Jackson, M. (2008). Robotics for SME´s – Investigating a Mobile, Flexible, and Reconfigurable Robot Solution. 39th International Symposium on Robotics, ISR 2008; Seoul; South Korea; 15 October 2008 through 17 October 2008.
Hedelind, M., Jackson, M. (2008). Industrial robotics in the lean enterprise – a case study. The Sixth International Conference on Manufacturing Research.
Jackson, M., Bellgran, M., Wiktorsson, M. (2008). Factory-in-a-box - Demonstrating the next generation manufacturing provider. The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan.
Granlund, A., Jackson, M. (2008). Logistics Automation - an Enabler for Competing. Hamburg: Schmidt Erich Verlag, HICL 2008: Logistics Networks and Nodes, 04 - 05 September 2008, HAMBURG, Germany.
Bellgran, M., Yamamoto, Y., Jackson, M. (2008). Kaizen and Kaikaku–: Recent challenges and support models. Stockholm Swedish Production Symposium SPS, Stockholm, 2008.
Stillström, C., Jackson, M. (2007). The Concept of Mobile Manufacturing. The 2007 CARV Conference on Changeable, Agile, Reconfigurable and Virtual Production.
Winroth, M., Jackson, M. (2007). Manufacturing competition through the Factory-in-a-Box concept. Annual POM Conference.
Hedelind, M. Jackson, M. Funk, P. Stahre, J. Söderberg, R. Carlsson, J. , ... Winroth M. (2007). Factory-in-a-Box - Solutions for Availability and Mobility of Flexible Production Capacity. The Swedish Production Symposium.
Jackson, M. (2007). Manufacturing competition through the factory in a box concept. The Production and Operations Management Society.
Jackson, M. (2007). Dimensions of the Concept of Mobile Manufacturing. The International Conference on Agile, Reconfigurable and Virtual Production.
Ask, A., Jackson, M. (2006). Factory-in-a-Box: An Enabler to Realize Mass Customization. The international conference on agile manufacturing, ICAM 2006, July 18-21, 2006, Norfolk, Virginia, USA.
Bengtsson, M., Elfving, S., Jackson, M. (2006). The Factory-in-a-Box Concept and Its Maintenance Application. Luleå The International Congress on Condition Monitoring and Diagnostic Engineering Management.
Ekman, S., Jackson, M. (2006). The Need for a New Innovative Product Development Approach. INTERNATIONAL DESIGN CONFERENCE - DESIGN 2006, Dubrovnik - Croatia, May 15 - 18, 2006.
Elfving, S., Jackson, M. (2005). A Model for Evaluating and Improving Collaborative Product Development. 15th International Conference on Engineering Design, ICED 05; Melbourne, VIC; Australia; 15 August 2005 through 18 August 2005.
Bengtsson, M., Olsson, E., Funk, P., Jackson, M. (2004). Technical Design of Condition Based Maintenance Systems: A Case Study using Sound Analysis and Case-Based Reasoning. MARCON (Maintenance and Reliability Conference), Knoxville, TN, USA, May 2004.
Bengtsson, M., Jackson, M. (2004). Important Aspect to take into Consideration when deciding to Implement Condition Based Maintenance. Cambridge, UK The International Congress on Condition Monitoring and Diagnostic Engineering Management.
Jackson, M. (2004). Fault Diagnosis of Industrial Robots using Acoustic Signals and Case-Based Reasoning. Madrid, Spain The European Conference on Case-Based Reasoning.
Andersson, A., Jackson, M. (2004). Efficient logistics development through regional collaboration. 6th research and application conference of PLAN 2004.
Hägg, A., Jackson, M., Granlund, Å. (2004). Need for strategic rightsourcing decision model: Case studies at ABB and Volvo. 5th International Symposium on Tools and Methods of Competitive Engineering, Lausanne, Switzerland, April 13-17, 2004.
Jackson, M. (2003). Managing Production Requirements within Product Development. The TMCE conference.
Jackson, M., Elfving, S. (2003). Improving producability of new products through concurrent engineering. Concurrent engineering –advanced design, production and management systems.
Jackson, M. (2002). Visionary production systems and Industrial IT. The International Symposium on Robotics.
Jackson, M. (2002). Is it possible to compete with internal production?. The International Symposium on Robotics.
Jackson, M. (2002). Competitive production systems and information management. International Symposium on Robotics.
Jackson, M., Johansson, C. (2000). An Agility Analysis from a Production System Perspective. International Conference on Gearing, Transmissions, and Mechanical Systems Location: NOTTINGHAM, ENGLAND Date: JUL 03-06, 2000.
Jackson, M., Johansson, C. (2000). Agility Within a Manufacturing Industry. North American Manufacturing Research Conference (NAMRC), May 2000, University of Kentucky, Lexington, Kentucky, USA..
Jackson, M., Fagerström, B. (2000). Distributed Manufacturing – A Solution for Industrial Competition in a Turbulent Market Environment. CIRP International Seminar on Manufacturing Systems.
Jackson, M., Petersson, P. (1999). A Model for Development of Future Manufacturing Systems. The CIRP International Seminar on Manufacturing Systems.
Jackson, M. (1999). Productivity: An Overall Measure of Competitiveness. Leuven: Katholieke Univ. Leuven, The International Workshop on Intelligent Manufacturing Systems.
Jackson, M., Johansson, C. (1998). Calculating the Cost of Poor Quality Using Discrete Event Simulation. The International Workshop: Intelligent Manufacturing Systems.
Jackson, M., Johansson, C. (1998). Calculating the Cost of Poor Quality Using Discrete Event Simulation. The International Workshop: Intelligent Manufacturing Systems.
Jackson, M., Johansson, C. (1997). Real Time Event Simulation of a PCB Production System for Operational Support. The Winter Simulation Conference.
Jackson, M., Johansson, C. (1997). Real Time Discrete Event Simulation of a PCB Production System for Operational Support. 1997 WINTER SIMULATION CONFERENCE, Renaissance Waverly Hotel, Atlanta, Georgia, U.S.A., 7-10 December 1997.